- Size:12*12*5cm.Super Bright 6 LED PIR sensor solar outdoor lights, waterproof and heatproof.
- Solar rechargeable energy for led lighting, Green and environmentally and power saving.
- Auto charge in day time and auto lighting in the night.
- Easy install and widely use.No batteries, no cables, easy to fit. Can be mounted basically anywhere like roof gutters fence, tree, dog house, wall.
- Recharged by solar power.
Solar Panel: Polycrystalline 0.8W.
First time use: Remove the protective film from the solar panel before the first use.
Turn the switch to ON position, and place the lamp under sunshine for at least 3 to 4 hours before first time use.(The power of lamp may run out during the long time transportation.)
This units has intelligent light control switch, automatic control products daily work, when the ray of light is more than 100 LUX, solar panels will charge the battery, and when the night falls or ray of light is lower than 100 LUX, this lamp will automatic light, no need human operate any more.
1.Turn the switch to ON position. The switch is located at the bottom base of the solar panel. Charge the solar product by placing it under direct sunshine for at least 4 hours.
2.The light will work automatically once the switch is on ON position. It will automatically charge under direct sunshine in the day time and illumination at night.
Note: In order to verify that knob is correctly switched to ON position. Cover the solar panel with your hand and the light will turn ON automatically.
3.It has human body induction motion sensor with lee than 60 times one night, after the induction it gives full light, each 45 seconds later, it turns to energy saving mode.(the induction distant is 6-8M,induction angle is 90 for full light)
1.Installation the solar product in an area where it can get direct sunlight.
2.Select an outdoor location away from other light source at night such as street lights,It may cause the product not to turn on automatically at night.
1 x Solar Motion Sensor Light
1 x User Manual